PVC Pipe Repair
Drains, Vents and Irrigation Lines
Cracked drain line, leaking glue joint or a broken sprinkler pipe? Our plumbers repair PVC pipe with properly primed, solvent-welded fittings so the joint is as strong as the pipe itself.
PVC Pipe Repair for Drain, Waste, Vent and Outdoor Lines
PVC is everywhere in modern plumbing. It carries wastewater from sinks, tubs and toilets, vents sewer gases through the roof and feeds irrigation systems and pool equipment. In some homes it also serves as the cold water service line from the meter. White schedule 40 PVC is the most common type, while thicker schedule 80 appears where extra strength is needed. It resists corrosion well, but it can crack, separate at joints or become brittle under certain conditions.
Proper PVC repair isn’t just glue and hope. The damaged section is cut out squarely, the ends are deburred and chamfered, and both pipe and fitting are cleaned and primed so the cement can fuse the plastic together. That chemical bond, called solvent welding, needs the right cement for the pipe size and conditions, along with adequate cure time before pressure or flow is restored. Skipping any of these steps is the main reason DIY PVC repairs leak.
PVC Pipe Repairs We Handle
We repair PVC pipe indoors and outdoors, from drain lines under sinks and in crawl spaces to buried irrigation, pool plumbing and vent stacks, using fittings and cements rated for each application.
Drain Lines
Replace cracked or leaking PVC drain sections under floors and sinks.
Glue Joints
Rebuild failed solvent-welded joints with fresh fittings, primer and cement.
Vent Pipes
Repair cracked or disconnected vent pipes in attics and roof penetrations.
Irrigation Pipe
Fix broken sprinkler mains and lateral lines buried in your yard.
Pool Lines
Repair leaking PVC lines at pool equipment pads and plumbing runs.
Transitions
Connect PVC to ABS, cast iron or copper using approved couplings.
Common Reasons PVC Pipe Cracks or Separates
Sunlight is one of the biggest enemies of PVC. Ultraviolet rays gradually break down standard pipe that isn’t painted or covered, making it chalky and brittle. Exposed outdoor lines at pool equipment, irrigation valves and exterior drains often crack after years of sun exposure. Cold weather adds to the problem, since PVC becomes less flexible as temperatures drop, and a knock from a shovel, mower or falling object can shatter it.
Installation issues cause many other failures. Joints made without primer, with too little cement or without fully seating the pipe can hold for years before separating. Overtightened threaded PVC fittings often crack at the threads. Pipes without adequate support sag and stress joints. Running hot water through PVC that isn’t rated for it softens the plastic, while shifting soil and tree roots can crack buried lines. Identifying the cause prevents the repair from failing the same way.
Why Customers Trust Our PVC Pipe Repairs
We follow the steps that make PVC joints last. Our licensed and insured plumbers cut square, deburr, dry fit, prime and cement every joint, then allow proper cure time before testing. We use fittings rated for the pipe schedule and pressure involved, add supports where lines sag and protect outdoor pipe from sunlight. When PVC meets another material, we use code-approved transition couplings rather than mixing cements that don’t bond properly.
Fast Service
Quick and Reliable Plumbing Services.
Qualified Team
Skilled and Certified Plumbers at Your Service.
Affordable Price
Competitive Quality Plumbing Solutions.
150+ Project Done
Our Track Record of Excellence.
Benefits of Professional PVC Pipe Repair
Properly made PVC joints are permanent, so the repair won’t separate or weep months later. Correct support and slope keep drain lines flowing freely and reduce clogs. Protecting outdoor pipe from UV exposure extends its useful life considerably. Using the right transition fittings prevents leaks where different pipe materials meet. And fixing irrigation and pool line leaks quickly saves significant water while protecting landscaping, decking and foundations from saturated soil.
PVC Pipe Repair in CA, TX and FL
Our plumbers repair PVC drains, vents, irrigation and pool lines across California, Texas and Florida, where strong sun, sprawling sprinkler systems and backyard pools put outdoor PVC through heavy use.
How to Tell PVC, CPVC and ABS Apart
Plastic pipes can look similar, but they’re made from different materials and each one requires different repair methods, fittings and cements.
PVC is usually white or gray and is used mainly for drains, vents, irrigation and cold water lines. CPVC is typically cream or light yellow, used for hot and cold water supply inside homes. ABS is black and used only for drains and vents, common in many western states, including California.
The printing along the pipe confirms the material, size and rating. Each type needs its own compatible cement, and PVC and ABS should only be joined with approved transition cement or mechanical couplings. Using the wrong products is a frequent cause of failed joints and recurring leaks.
How Our PVC Pipe Repair Works
Let us know where the PVC is damaged and what it carries. For supply or irrigation leaks, close the relevant valve first.
Your plumber exposes the damaged pipe, reads the markings to confirm material and schedule and checks the surrounding joints and supports. For buried lines, the area is carefully excavated by hand near the pipe. We explain the cause, the repair approach and the price before starting the work.
The damaged length is cut out, ends are prepared and new pipe is solvent welded with primer and cement, or joined with repair couplings where movement is limited. After the proper cure time, drains are flow tested and pressure lines are tested under pressure. Outdoor pipe is protected, and trenches are backfilled carefully.
Get Your PVC Pipe Fixed Today
Cracked drain, leaking joint or broken sprinkler line? Call our licensed plumbers for PVC pipe repair using proper solvent welding and the correct fittings.
PVC Pipe Repair Questions Answered
Is primer necessary for PVC joints?
In most plumbing applications, yes. Primer softens and cleans the plastic so the cement can fuse both surfaces into a strong, permanent joint.
How long does PVC cement need to cure?
It depends on pipe size, temperature and humidity. Small drains may be usable quickly, while larger or pressurized lines need longer cure times.
Can PVC be used for hot water?
Standard PVC isn’t rated for hot water supply. CPVC or PEX is used for hot water lines, since PVC softens under sustained heat.
Can PVC be connected to ABS?
Only with approved transition cement or a mechanical coupling, depending on local code. Ordinary PVC cement doesn’t bond properly to ABS pipe.
Why did my outdoor PVC pipe crack?
Sun exposure makes unprotected PVC brittle over time. Cold temperatures, impacts and lack of support also commonly cause outdoor pipe to crack.