Shower Installation Services
Prefab Units to Custom Tile
Adding a new shower, converting a tub or building a custom tiled walk-in? Our plumbers install the valve, drain, supply lines and pan so your new shower is comfortable, safe and watertight.
Shower Installation for Prefabricated Units and Custom Tiled Showers
New showers generally fall into two categories. Prefabricated units, made of fiberglass or acrylic, arrive as one-piece or multi-piece kits with the walls and base molded together. They install quickly, cost less and have few seams to maintain. One-piece units usually need to go in during construction, since they often won’t fit through existing doorways, while multi-piece kits are designed for remodels where space is tight and access is limited.
Custom tiled showers are built on site, giving you complete control over size, layout, niches, benches and finishes. They require more steps: a properly sloped shower pan or prefabricated base, a waterproofing membrane on walls and floor, a correctly positioned drain and a valve set at the right depth for the trim. Our plumbers handle the plumbing for both approaches and coordinate closely with your tile installer or contractor on timing and details.
Shower Installation Services We Offer
We install new showers in homes, additions, ADUs, hotels and fitness facilities, handling valve and supply rough-in, drain connections, pan installation and testing, and working alongside tile installers and contractors throughout the project.
Prefab Units
Install one-piece and multi-piece fiberglass or acrylic shower units with proper support.
Tiled Showers
Rough in valves, drains and pans for custom tiled shower builds.
Tub Conversions
Convert old bathtubs into walk-in showers with relocated drains and valves.
Walk-In Showers
Install curbless and low-threshold showers with linear or center drains.
Multi-Outlet Systems
Plumb rain heads, handhelds and body sprays with properly sized valves.
Accessible Showers
Install barrier-free showers with blocking for grab bars and seats.
What a Tub-to-Shower Conversion Project Actually Involves
Converting a rarely used bathtub into a walk-in shower is one of the most popular bathroom upgrades, especially for homeowners planning to age in place. The project starts with removing the tub and its surround. The tub drain is usually located at one end, while a shower drain typically sits in the center or along one wall, so the drain often needs to be relocated, which may involve cutting into the slab or accessing the floor from below.
The valve is usually changed as well. Tub and shower valves include a spout outlet that’s no longer needed, and the shower head may be raised for a more comfortable height. A new shower pan or base is installed and waterproofed, and blocking can be added for grab bars and a fold-down seat. We coordinate these plumbing changes with your contractor so the conversion is watertight, accessible and comfortable to use.
Why Customers Choose Our Shower Installation
We install the parts of a shower that nobody sees but everyone relies on. Our licensed and insured plumbers set valves at the correct depth and height, pressure test supply lines before walls close, flood test pans before tile goes on and confirm drain slope. We add blocking for future grab bars on request and set anti-scald limits. Our timing works around your tile setter, so the project moves smoothly.
Fast Service
Quick and Reliable Plumbing Services.
Qualified Team
Skilled and Certified Plumbers at Your Service.
Affordable Price
Competitive Quality Plumbing Solutions.
150+ Project Done
Our Track Record of Excellence.
Benefits of Professional Shower Installation
Professional installation ensures your new shower stays watertight behind the tile for years, protecting subfloors and ceilings below. Correctly positioned valves and heads make the shower comfortable for every user. Proper drain slope prevents standing water and mildew. Pressure and flood testing catch problems before finishes are installed. And code-compliant work with the proper permits protects your home’s value, insurance coverage and resale appeal for many years down the road.
Shower Installation in CA, TX and FL
Our plumbers install showers for homeowners, builders, remodelers and hospitality businesses throughout California, Texas and Florida, including tub conversions, custom tiled walk-ins, steam-ready enclosures and accessible barrier-free showers for every age and ability.
Getting Shower Valve and Head Heights Right
Valve and showerhead placement are decided during rough-in, long before tile goes up. Getting them right makes daily showers far more comfortable.
Shower valves are commonly placed around forty-five to fifty inches above the floor, within easy reach. In walk-in showers, many homeowners prefer the valve near the entrance, so they can turn on the water without stepping under a cold spray. Handheld shower brackets and slide bars should be reachable when seated, too.
Standard showerhead arms are often set around eighty inches high, but taller households may prefer higher placement, and rain heads mounted on the ceiling need different planning. Discussing your preferences and the heights of household members before rough-in ensures the finished shower suits everyone who uses it daily.
How Our Shower Installation Works
We review your shower plans, fixture selections and layout, confirming valve type, outlets, drain location and any accessibility features you want.
During rough-in, supply lines are run, the valve is set at the correct depth and height and the drain is positioned and connected. Supply lines are pressure tested. For tiled showers, the pan is installed and flood tested before waterproofing and tile. Prefab units are leveled, supported and secured.
After tile or wall panels are complete, we install the valve trim, showerhead and accessories. Temperature limits are set to help prevent scalding. We run the shower, check flow, temperature and drainage, inspect for leaks and walk you through operating and caring for the new fixtures.
Plan Your New Shower Installation
Building a new shower or converting a tub? Our licensed plumbers provide shower installation that’s watertight, comfortable and built to code from day one.
Shower Installation Questions Answered
Can a bathtub be converted into a shower?
Yes. Tub-to-shower conversions usually involve relocating the drain, changing the valve and installing a new pan or base with waterproofing.
Is a prefab or tiled shower better?
Prefab units cost less and install faster. Tiled showers offer custom sizes and finishes but require more steps and careful waterproofing.
How high should a shower valve be?
Valves are commonly set around forty-five to fifty inches above the floor, adjusted for your household’s heights, preferences and accessibility needs.
Does a new shower need a permit?
Many jurisdictions require permits for new showers or relocated plumbing. We handle the permits and schedule inspections wherever they’re required locally.
How long does shower installation take?
Prefab units may take one to two days. Custom tiled showers take longer, often one to two weeks including tile work.